WALL SAWS

  • Results Per Page
  • Sort By
EURODIMA WALL SAW SET :
  • EURODIMA WALL SAW SET :
  • Eurodima
  • Code: WS26 set
  • The new wall saw delights users with maximum performance and low weight. A long tool life and theworldwide longest service interval for wall saws will also make this a very economical choice.Structurally identical feed and swivel motors, equipped with a wear-free electromagneticbrake, also contribute to the cost effectiveness. …
  • Availability: Out of stock
Power Unit WS20PU
  • Power Unit WS20PU
  • Eurodima
  • Code: WS-PowerUnit
  • The PowerUnit is a supply- and control unit for the wall saw WS20 and the motor WS20PM. Themotor rpm is progressively adjustable. Feed and swivel are regulated by the remote control connected tothe PowerUnit. 
  • Availability: In stock
Saw Head WS20H, for Hilti Rail
  • Saw Head WS20H, for Hilti Rail
  • Eurodima
  • Code: WS-SawHead
  •    - Lightweight saw head with 29 kg    - Long life service interval after 250 operating hours    - Feed and swivelling motor are structurally identical – easy exchange    - Feed and swivel motor are protected from overload with a friction clutch    - Wear-free, electromagnetic brake
  • Availability: Out of stock
engine to Saw Head WS20E / H
  • engine to Saw Head WS20E / H
  • Eurodima
  • Code: WS-Motor
  •   - 20KW servo motor   - Power transmission from the motor with a      dampened claw coupling - wear-free   - Tool-free motor interlock with hand lever   - Automatic cooling water drain   - Long life service interval after 250 operating hours
  • Availability: In stock
cable Power unit to WS20E / H
  • Availability: In stock
Servo Cable SC20
  • Servo Cable SC20
  • Eurodima
  • Code: WS-ServoCable
  •   - Length 10 m (33 ft)   - Very solid design   - Incl. strain relief and protection cap
  • Availability: In stock
wireless remote control for ServoEngine incl. 2 battery; bat
  • Availability: In stock
Safeguard Ø800mm, 32"
  • Availability: In stock
Safeguard 1000 mm, 40''
  • Availability: In stock
Safeguard Ø1200mm, 48"
  • Availability: In stock
Safeguard for flush cutting Ø800mm, 32"
  • Availability: In stock
Safeguard for flush cutting Ø1000mm, 40"
  • Availability: In stock
Safeguard for flush cutting Ø1200mm, 48"
  • Availability: In stock
3.3 ft Hilti Guide Rail for WS20H
  • Availability: In stock
6.6 ft Hilti Guide Rail for 6WS20H
  • Availability: In stock
7.5 ft Hilti Guide Rail for 6WS20H
  • Availability: In stock
Guide Rail support to WS20H
  • Availability: In stock
Eccentric pin to WS20H
  • Availability: In stock
End stop to WS20H
  • Availability: In stock