Connect Here
EURODIMA WALL SAW SET :
Product Code: WS26 set
The new wall saw delights users with maximum performance and low weight. A long tool life and theworldwide longest service interval for wall saws will also make this a very economical choice.Structurally identical feed and swivel motors, equipped with a wear-free electromagneticbrake, also contribute to the cost effectiveness.
- Wall saw head: only 64 lbs
- Motor with 20 KW ServoPower, convenient 26 kg and water-cooling - no additional after cooling necessary
- Tool-free motor interlock with hand lever
- Power transmission from the motor with a dampened claw coupling wear free
- Autonomous cooling water drain from motor and saw – avoiding frost damage
- Wear-free, electromagnetic brake
- Tool-free quick release fastener for blade guard
- Long life service interval after 250 operating hours
- Feed and swivel motor are structurally identical - easy to be exchanged
- Feed and swivel motor are protected with a friction clutch from overload
- Simultaneous control of feed and swiveling possible
- Improved roller system due to axial and radial bearings
- Flush flange can be assembled and disassembled from the motor side – radial blade flange holder
- Free saw blade lift of Ø (32.5"); able to start with 32" blade
- Blade diameter up to Ø (62"), therefore a max. cutting depth of (28.5")
- Standard equipped with radio remote control
- Air-cooled control box
- Hardened roller guide
- Operation with 16 A also possible
- Automatic control of the feed and lowering speed
- Availability: Out of stock
This Kit Contains:
- Saw Head WS20H, for Hilti Rail* (x 1)
- engine to Saw Head WS20E / H* (x 1)
- Power Unit WS20PU* (x 1)
- wireless remote control for ServoEngine incl. 2 battery; bat* (x 1)
- cable Power unit to WS20E / H* (x 1)
- Servo Cable SC20* (x 1)
- Blade Guard Holder for WS26* (x 1)
| SPECIFICATIONS | WS26 |
| Output power at the saw blade | 20 kW |
| Max. speed at the saw blade | 1,140 rpm |
| Max. blade diameter | 1,600 mm |
| Max. cutting depth | 725 mm |
| Feed and swivel force | 300 kg |
| Lowering – longitudinal feed | 0–3 m/min |
| Max. speed of the swivel arm | 0–2 rpm |
| Weight – wall saw motor | 12.0 kg |
| Weight – saw head without motor | 29 kg |
| Saw blade bore | 60 mm - other on request |
| Saw blade flange for flush cut | WS20E TK 110 - 6 x M8 TK 130 - 6 x M8 |
| WS20H TK 110 - 6 x M10 TK 130 - 6 x M8 | |
| Machine dept | 424.5 mm |
| Machine width for horizontal swivel arm | 430 mm |
| Machine width | 380 mm |